News
LOCATION : Home>News >

How To Choose 3M Double Sided Sticker And Storage Environment Requirements

Published by admin 2021-09-09

How To Choose 3M Double Sided Sticker And Storage Environment Requirements

3M Double Sided Sticker Widely utilized in computers, mobile phones, communications, household appliances, audio-visual equipment, automobiles and other products, should be selected consistent with the requirements of the appliance of products and environment, can ask the subsequent instructions:

1, non-woven substrate double-sided adhesive and good processing, general long-term temperature 70-80℃, short-term temperature 100-120℃, thickness is usually 0.08-0.15mm, suitable for laminating plate, plastic laminating, automobile, mobile , electrical appliances, sponge, rubber, signs, paper products, toys and other industries, home appliances and musical instrument parts assembly, display lens.


2, no substrate double-sided adhesive has excellent bonding effect can prevent slump and excellent waterproof performance, good processability, good temperature resistance, short-term temperature resistance of 204-230℃, general long-term temperature resistance of 120-145℃, thickness is usually 0.05-0.13mm, suitable for sticker plate, panel, decorative pieces of bonding.


3, PET substrate double-sided adhesive has good temperature resistance, strong shear resistance, general long-term temperature 100-125℃, short-term temperature 150-200℃, thickness is usually 0.048-0.2mm, suitable for sticker plate, LCD, decorations, decorative pieces of bonding.


4, foam substrate double-sided adhesive has soft, good adhesion, good initial viscosity and holding viscosity, good solvent resistance and UV resistance, general thickness of 0.4-1.0mm, short-term temperature resistance of 130-150℃, long-term temperature resistance of 80-93℃, suitable for air conditioners, furniture , communication products bonding, can replace the screw fixed design, make the merchandise more beautiful.


5, hot melt film has good consistency, uniform bonding thickness, doesn't contain solvent, easy processing, good adhesion to several objects, the thickness of 0.1mm, the colour is translucent/amber, hot melt softening temperature 116-123℃.It is suitable for the bonding of nameplate, plastic and hardware.Good results also can be obtained on uneven surfaces. Initial bonding conditions are recommended: temperature 132-138 ° C, bonding time 1-2 seconds, and pressure 10-20 pounds per sq in .

How To Choose 3M Double Sided Sticker And Storage Environment Requirements

3M Double Sided Sticker should be operated within the following ways to get enhanced bonding effect:


1. Clean and dry the adhesive surface first. it's generally recommended to wipe the surface with a mix of 1:1 IPA (isopropyl alcohol) and water with a cloth, then dry the surface completely.


2. After the cleaning solvent is dried, glue the tape to the adhesive surface, and apply the pressure of about 15PSI (1.05 kg/cm2) by roller or other means to form it effectively bonded.


3. Tore off the tape release paper, then paste the fabric to be bonded. Also apply 15PSI pressure to form it effectively bonded.If the bubbles got to be removed, the pressure should be increased to the upper limit of the item can withstand.


4, paste the perfect temperature is 15-38℃, not but 10℃.


5. When tape is bonded, one end should be glued first, then gently pressed to the opposite end to scale back the probability of bubbles.The suitable environmental requirements for 3M double-sided tape storage: temperature is 19-23℃, humidity is 40-60%.